Analog Sensors – Computech https://computech.com Electronics for The Motorsports Industry Mon, 05 Jan 2026 16:31:11 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4 https://computech.com/wp-content/uploads/2016/07/cropped-CM-16-Favicon-1-150x150.png Analog Sensors – Computech https://computech.com 32 32 Pressure Sensor Cable https://computech.com/product/pressure-sensor-cable/ Mon, 16 Dec 2024 16:21:42 +0000 https://computech.com/?post_type=product&p=24155 This is a replacement cable for any of our professional pressure sensors. Available in 12′ and 20′ lengths.

]]> Shock Sensor Mount https://computech.com/product/shock-sensor-mount/ Mon, 16 Dec 2024 16:01:58 +0000 https://computech.com/?post_type=product&p=24143 This bracket is made to mount your shock travel sensor as easily as possible. This may not work in all applications or on both the top or bottom of the shock. Please examine your installation to ensure this bracket will work for you.

]]> O2 Sensor Weld-In Nut https://computech.com/product/o2-sensor-weld-nut/ Thu, 03 Nov 2016 15:47:38 +0000 http://computech.com/?post_type=product&p=18094 Check out our O2 Sensor Weld-In Nut from Computech Systems today! This Sensor Nut allows you to mount an oxygen sensor to any exhaust that the nut can be welded onto.

]]> 500 psi Pressure Monitor Kit https://computech.com/product/500-psi-pressure-monitor-kit/ Wed, 09 Mar 2016 20:29:20 +0000 http://computech.computechmarketing.com/product/500-psi-pressure-monitor-kit/ 500 psi Pressure Monitor Kit is a great wide range pressure sensor that is still extremely accurate in low and high pressure environments. The 500 psi Pressure Monitor Kit is typically used for oil pressure, injected fuel psi, and transmission pressure. Pressure sensor will monitor from 0 to 500 psi. 500 psi Pressure Monitor Kit includes a stainless steel pressure transducer and 15' extension cable. The 500 psi Pressure Monitor Kit is compatible with most gases and fluids, including gasoline, methanol, oil, etc.]]> Computech Racing System’s 500 psi Pressure Monitor Kit is a great wide range pressure sensor that is still extremely accurate in low and high pressure environments. You will be able to record and monitor hydraulic pressure during transmission operation, and record min/max plot pressure to locate shift problems, flares, slippage and other transmission issues.. Typically used for oil pressure, injected fuel psi, and transmission pressure. Pressure sensor will monitor from 0 to 500 psi. Kit includes a stainless steel pressure transducer and 15′ extension cable. The 500 psi Pressure Monitor Kit is compatible with most gases and fluids, including gasoline, methanol, oil, etc.

]]> Throttle Position Kit https://computech.com/product/throttle-position-kit/ Wed, 09 Mar 2016 20:29:17 +0000 http://computech.computechmarketing.com/product/throttle-position-kit/ Being able to monitor what happens to the car down the track is extremely important, but so is being able to monitor what the driver did. Did the driver let off the throttle before or after the finish line? How much did they let off? How much mph did that kill? With the Computech Systems Throttle Position Kit you can finally monitor exactly what the driver did at the top end and increase the chance of reproducing successful results.

The Throttle Position Kit comes with the Throttle Position Sensor, extension cable, and all necessary hardware to mount to your carburetor.

]]> 12′ Oxygen Sensor Extension Cable https://computech.com/product/12-oxygen-sensor-extension-cable/ Wed, 09 Mar 2016 20:29:08 +0000 http://computech.computechmarketing.com/product/12-oxygen-sensor-extension-cable/ 12' Oxygen Sensor Extension Cable will allow you to extend the length between your actual oxygen sensor and the O2 controller. One side of the connecter is already terminated to fit the oxygen sensor. The other side is left open so that you can customize the length. We provide you with the Deutch connector and terminals that are easy to crimp with your standard crimpers, no specialty tools required.]]> Shop with Computech Racing System’s today for an Oxygen Sensor extension cable! This 12′ Oxygen Sensor Extension Cable will allow you to extend the length between your actual oxygen sensor and the O2 controller. One side of the connecter is already terminated to fit the oxygen sensor. The other side is left open so that you can customize the length. We provide you with the Deutch connector and terminals that are easy to crimp with your standard crimpers, no specialty tools required. The Extension cable is high quality and heat resistant!

Shop with Computech Racing for all of your Oxygen Sensor components!

]]> Shock Travel Sensor https://computech.com/product/shock-travel-sensor/ Wed, 09 Mar 2016 20:28:56 +0000 http://computech.computechmarketing.com/product/shock-travel-sensor/ Shock Travel Sensor is available in a 4" and 8" lengths and is one of the strongest shock travel sensors we have found on the market. Mounting is a breeze and the information gathered through shock travel can go a long way to perfecting your setup.]]> This Shock Travel Sensor is available in a 4″ and 8″ lengths and is one of the strongest shock travel sensors we have found on the market. Mounting is a breeze and the information gathered through shock travel can go a long way to perfecting your setup.

]]> O2 Sensor Plug https://computech.com/product/o2-sensor-plug/ Wed, 09 Mar 2016 20:28:56 +0000 http://computech.computechmarketing.com/product/o2-sensor-plug/ O2 Sensor Plug mates with the 8 x 1.5mm weld-in nut and allows removing the sensor after tuning. Without this plug, removing your oxygen sensor will result in an open hole in your exhaust.]]> Do you remove the O2 Sensor nut and leave your pipe exposed? This O2 Sensor Plug mates with the 8 x 1.5mm weld-in nut and allows removing the sensor after tuning. Without this plug, removing your oxygen sensor will result in an open hole in your exhaust.

Looking for the O2 Sensor Nut so that you can mount your oxygen sensor? Computech Racing System’s O2 Sensor Nut allows you to mount an oxygen sensor to any exhaust that the nut can be welded onto. The 8 x 1.5mm Weld-In Nut is only for mounting the O2 sensor onto the exhaust pipe.

]]> Replacement Wide Band Oxygen Sensor https://computech.com/product/replacement-wide-band-oxygen-sensor/ Wed, 09 Mar 2016 20:28:56 +0000 http://computech.computechmarketing.com/product/replacement-wide-band-oxygen-sensor/ Replacement Wide Band Oxygen Sensor to be used with a Daytona oxygen controller box. Includes only the sensor.]]> This is a standard Replacement Wide Band Oxygen Sensor to be used with a Daytona oxygen controller box. Includes only the sensor.

]]> Dual Wide Band O2 Sensor Kit https://computech.com/product/dual-wide-band-o2-sensor-kit/ Wed, 09 Mar 2016 20:28:56 +0000 http://computech.computechmarketing.com/product/dual-wide-band-o2-sensor-kit/ Dual Wide Band O2 Sensor Kit gives you the ability to monitor the air/fuel ratio of either side of the engine. Oxygen sensors are quickly becoming the gold standard for tuning your engine as it is the most reliable measure of a cars tune up available today. Complete air/fuel ratio monitoring system connects directly to the DataMaxx data logger. This versatile tuning aid is designed to work with carbureted or fuel injected engines and the sensor is compatible with gasoline or methanol.]]> The Dual Wide Band O2 Sensor Kit gives you the ability to monitor the air/fuel ratio of either side of the engine. Oxygen sensors are quickly becoming the gold standard for tuning your engine as it is the most reliable measure of a cars tune up available today. Complete air/fuel ratio monitoring system connects directly to the DataMaxx data logger. This versatile tuning aid is designed to work with carburetor or fuel injected engines and the sensor is compatible with gasoline or methanol.

Kit Includes:

  • Two Wide Band Oxygen Sensor
  • Interface Module with Cable
  • Two 18 x 1.5mm weld in nut for mounting sensor in exhaust pipe
]]>