Sensors & Wiring – Computech

Magneto Tach Adapter

Matt Parlett — Mon, 16 Dec 2024 16:25:54 +0000

This Magneto Tach Adapter allows you to get a clean and smooth signal when utilizing a magneto ignition system.

Pressure Sensor Cable

Matt Parlett — Mon, 16 Dec 2024 16:21:42 +0000

This is a replacement cable for any of our professional pressure sensors. Available in 12′ and 20′ lengths.

Shock Sensor Mount

Matt Parlett — Mon, 16 Dec 2024 16:01:58 +0000

This bracket is made to mount your shock travel sensor as easily as possible. This may not work in all applications or on both the top or bottom of the shock. Please examine your installation to ensure this bracket will work for you.

Diesel RPM Sensor Kit

Matt Parlett — Thu, 21 Nov 2024 19:19:48 +0000

This Diesel RPM Sensor Kit comes with everything needed to monitor your diesel tractors engine rpm. Without a typical ignition system, we need to utilize the Dakota Sensor to monitor the flywheel or bolts on a pulley and the Dakota Digital Signal Conditioner Box to convert the signal into a usable Engine RPM Signal.

Deutsch Crimping Tool

Matt Parlett — Wed, 04 Nov 2020 15:18:02 +0000

This Deutsch Crimping Tool is the only approved way to crimp the closed female pins and closed male pins. This crimping method is far superior to the open method as it puts equal pressure from the outside of the connector to the wire being crimped. It also has a variety of gauge settings to ensure there is no over or under crimping.

Deutsch connectors are now the gold standard in automotive and performance racing wiring. The Deutsch DT connector is an extremely reliable, weatherproof and durable connector made with high quality components to ensure your electrical connections are solid. A Deutsch connector consists of a Pin that is crimped onto the wire using either a special Crimping Tool or a standard set of open barrel crimpers. The pins then go into a weather proof wire seal that is inside of the Pin Housing. Finally a locking wedge ensures that the pins are aligned properly. Available in 2, 3, 4, 6, 8 and 12 conductor, the Deutsch connector series is the only connector you should have on your race car.

Flow Meter

Matt Parlett — Thu, 23 Aug 2018 14:30:56 +0000

Flow Meters allow you to determine exactly how much fuel you are pumping into your engine. Fuel pressure can give you a good idea but there is nothing more accurate than a flow meter for determine how much fuel is being pumped into your engine. The flow meters are available in three different sizes with different maximum gallons per minute for each.

Ultimate Connector Kit

Matt Parlett — Tue, 11 Jul 2017 19:53:37 +0000

This Ultimate Connector Kit is everything you’ll need to have at the race track. We didn’t skimp when we put this box together, we put everything in it that we take to the track ourselves. We utilize the high quality construction of the Deutsch connectors but have the parts to repair Weather Pack if need be. We supply you with the open barrel Deutsch pins so that you don’t need the special Deutsch tool to create a quality connector. The terminals we supply you with aren’t the standard cheap ones that can bend and break. They’re high quality nickel plated alloy steel terminals that can withstand temperatures up to 1200 degrees. We even supply you with the shrink tubing and wires ties to make sure its a clean job. And it’s all in a easy to store plano box with fixed dividers so your parts won’t ever get mixed up.

If you are the type of racers that likes to be prepared and believe in having the right tool for the right job then this kit is for you. Nowhere else will you find a more comprehensive racing connector kit than the Computech Ultimate Connector Kit.

Kit Includes:

2c Deutsch Kit (3)
3c Deutsch Kit (2)
4c Deutsch Kit (2)
6c Deutsch Kit (2)
Deutsch Female Pins 12-16 gauge (50)
Deutsch Male Pins 12-16 gauge (50)
Deutsch Female Pins 16-20 gauge (50)
Deutsch Male Pins 16-20 gauge (50)
Weather Pack Female Pins 14-16 gauge (20)
Weather Pack Male Pins 14-16 gauge (20)
Ring Terminal 10-12 gauge 1/4″ (6)
Ring Terminal 10-12 gauge 3/8″ (6)
Ring Terminal 10-12 gauge #10 (12)
Ring Terminal 14-16 gauge 1/4″ (6)
Ring Terminal 14-16 gauge #6 (12)
Ring Terminal 14-16 gauge #10 (12)
Spade Terminal 10-12 gauge #16 (12)
Spade Terminal 14-16 gauge #10 (12)
Spade Terminal 14-16 gauge #6 (12)
Male Disconnect 14-16 gauge (12)
Female Disconnect 14-16 gauge (12)
Butt Connector 10-12 gauge (12)
Butt Connector 14-16 gauge (12)
Step Down Connector 10/12 to 14/16 gauge (6)
Step Down Connector 14/16 to 16/18 gauge (6)
Insulated Closed End Butt Connectors 10-12 gauge (12)
Shrink Tubing 3/32″ Diameter (12″)
Shrink Tubing 3/16″ Diameter (24″)
Shrink Tubing 1/4″ Diameter (24″)
Shrink Tubing 3/4″ Diameter (6″)
Wire Ties (25)
Computech Screwdriver

Mag Tach Adapter

Fallon Carrico — Thu, 03 Nov 2016 16:50:09 +0000

The DataMaxx can read your engine RPM by taking a signal from this Mag Tach Adapter.

9″ Ford Large Pinion Driveshaft R.P.M Kit

Fallon Carrico — Thu, 03 Nov 2016 16:39:52 +0000

The 9″ Ford Large Pinion Driveshaft Kit allows you to get an accurate reading of your driveshaft RPM. Available in large pinion (2.190″). Includes drive shaft pick-up sensor, 15′ extension cable, trigger collar, and mounting bracket.

Looking for just a replacement sensor? Computech Racing sells replacement driveshaft sensors, but does not include any extension cables or mounts.

Need to measure more than just your driveshaft RPM? Try out Computech Racing System’s DataMaxx Bracket Kit. The Bracket Kit includes the DataMaxx Drive shaft kit, engine RPM, fuel psi, oil psi, water temp, a single EGt probe, battery voltage, and two switch monitors.

O2 Sensor Plug

Fallon Carrico — Thu, 03 Nov 2016 15:54:54 +0000

Check out our very easy to weld O2 Sensor Plug! Providing a secure seal, it’s all you need to complete the job!