This O2 Sensor Nut allows you to mount an oxygen sensor to any exhaust that the nut can be welded onto. The 8 x 1.5mm Weld-In Nut is only for mounting the O2 sensor on exhaust pipe. You can also purchase an optional O2 Sensor Plug if the sensor ever needs to be removed.
This O2 Sensor Plug mates with the 8 x 1.5mm weld-in nut and allows removing the sensor after tuning. Without this plug, removing your oxygen sensor will result in an open hole in your exhaust.
This is a standard Replacement Wide Band Oxygen Sensor to be used with a Daytona oxygen controller box. Includes only the sensor.
This 12′ Oxygen Sensor Extension Cable will allow you to extend the length between your actual oxygen sensor and the O2 controller. One side of the connecter is already terminated to fit the oxygen sensor. The other side is left open so that you can customize the length. We provide you with the Deutch connector and terminals that are easy to crimp with your standard crimpers, no specialty tools required.
These Wire Strippers are made specifically to strip those smaller gauge wires that most typical wire strippers can’t. The CAN Bus wire is a small 24 gauge wire, therefore we recommend all of our customers that have to connect a LCD, EGT, Expansion or Remote SD module use these wire strippers. Included in initial orders.
This O2 Sensor Weld-In Nut allows you to mount an oxygen sensor to any exhaust that the nut can be welded onto.
If you are looking for a low cost and feature rich way of tracking your Air Fuel Ratio, no oxygen sensor device gives you more bang for your buck than the Single Channel O2 Monitor.
If you are looking for a low cost and feature rich way of tracking your Air Fuel Ratio, no oxygen sensor device gives you more bang for your buck than the Dual Channel O2 Monitor with Display.
The 2c Deutsch Set includes all of the components to make a 2 conductor extension with the Deutsch connector. Includes a 2c Female Case, 2c Male Case, 2c Female Wedge, 2c Male Wedge, 2 Female Pins and 2 Male Pins. Please select whether you would like the open terminal pins (can use any standard crimper) or the closed terminal pins (requires special Deutsch connector tool). Available in 12-16 gauge or 16-20 gauge.
The 3c Deutsch Set includes all of the components to make a 3 conductor extension with the Deutsch connector. Includes a 2c Female Case, 2c Male Case, 2c Female Wedge, 2c Male Wedge, 2 Female Pins and 2 Male Pins. Please select whether you would like the open terminal pins (can use any standard crimper) or the closed terminal pins (requires special Deutsch connector tool). Available in 12-16 gauge or 16-20 gauge.
The 4c Deutsch Set includes all of the components to make a 4 conductor extension with the Deutsch connector. Includes a 4c Female Case, 4c Male Case, 4c Female Wedge, 4c Male Wedge, 4 Female Pins and 4 Male Pins. Please select whether you would like the open terminal pins (can use any standard crimper) or the closed terminal pins (requires special Deutsch connector tool). Available in 12-16 gauge or 16-20 gauge.
The 6c Deutsch Set includes all of the components to make a 6 conductor extension with the Deutsch connector. Includes a 6c Female Case, 6c Male Case, 6c Female Wedge, 6c Male Wedge, 6 Female Pins and 6 Male Pins. Please select whether you would like the open terminal pins (can use any standard crimper) or the closed terminal pins (requires special Deutsch connector tool). Available in 12-16 gauge or 16-20 gauge.
The 8c Deutsch Set includes all of the components to make a 8 conductor extension with the Deutsch connector. Includes a 8c Female Case, 8c Male Case, 8c Female Wedge, 8c Male Wedge, 8 Female Pins and 8 Male Pins. Please select whether you would like the open terminal pins (can use any standard crimper) or the closed terminal pins (requires special Deutsch connector tool). Available in 12-16 gauge or 16-20 gauge.
The 12c Deutsch Set includes all of the components to make a 12 conductor extension with the Deutsch connector. Includes a 2c Female Case, 2c Male Case, 2c Female Wedge, 2c Male Wedge, 2 Female Pins and 2 Male Pins. Please select whether you would like the open terminal pins (can use any standard crimper) or the closed terminal pins (requires special Deutsch connector tool). Available in 12-16 gauge or 16-20 gauge.
This GXL Wire 6 Pack gives you 25 feet of 6 different colors. GXL wire is specifically designed for use in the automotive industry. GXL wire is recommended for use in harsh and high heat conditions, making it ideal for the performance racing industry. The GXL Wire 6 Pack comes in colors Black, Red, Blue, Green, Yellow and Brown. Please select whether you would like 12, 14, 16 or 20 gauge.