A great new product for roll-bar mounting your Mega Dial Panel in Door Cars or Altered’s.
The MDP Mounting Bracket is made of lightweight aluminum, and is specifically designed for the Mega Dial Panel ensuring a perfect fit.
The bracket has a spacer bar that automatically aligns the left and right mounts for easy and quick installation, and arched sides for simple running of wires.
It comes with all the necessary tools and hardware for installation.
Our Portatree Practice Tree Cigarette Lighter Adapter is for use with the Eliminator Dual-Lane Practice Tree and the Pocket Pal Single-Lane Practice Tree. 12 Volt DC Adaptor that plugs into any automotive cigarette lighter socket (center pin positive). Easily modified for vehicles without a cigarette lighter socket.
Used to increase the length of the cable between your Digital Delay Switch Panel and the Relay Board.
Available in 4-foot or 8-foot lengths.
Practice Tree Clutch Pedal is for those racers that use a manually activated clutch or want to simulate brake release.
The Pro Cube is the base delay box by K & R Performance. Has all the features as the other Pro Cube models but without any timers.
The Pro Cube 1 is very similar to the popular Pro Cube 3 but has only a single 4-stage timer instead of three 2-stage timers.
The Pro Cube 3 by K & R Performance is a great delay box with plenty of features in a small package.
This high amperage Snap Action Mushroom Button, positive feel transbrake, nitrous or line lock button is the very popular “Over-sized, Mushroom” button.
This is especially comfortable when wearing gloves or for “Pro-tree” racers who have to hit the trans brake button very quickly after staging, or for you bracket racers who “hit” the tree twice!
Comes complete with a stretch cord. Threaded shaft, and locknut make it very simple to mount on a steering wheel, or any other desired location.
This Snap Action TransBrake Button is a high amperage heavy-duty Snap Action, positive feel transbrake, nitrous or line lock button.
Made by Otto Controls, this button comes complete with a stretch cord. Threaded shaft, and locknut that make it very simple to mount on a steering wheel, or any other desired location.
This transbrake button was designed for stock eliminator racers who plan on using the 2-step on the brake pedal as per NHRA’s new rules. The wires are safely enclosed, and can handle the pounding of a foot.
This RaceAir Pouch is designed to protect your RaceAir & RaceAir Pro’s weather station from extreme heat, dust and give you a convenient way to store it. The black case is great for dissipating heat allowing the sensors to acclimate to actual weather conditions faster when its removed, as well as minimizing the amount of dirt viewable. The case is padded to help in absorbing any shock of being dropped and it comes with a velcro top for easy removal and security. The case also has a velcro belt loop allowing you to easily carry around the staging lanes.
This is the rotating hub that that wind cups connect to for the RaceAir Cloud weather stations that have the wind meter. The most common place to break a wind meter is on this rotator assembly where the two prongs compress and hold the wind cups. If one of your two tabs have broken, you will need to purchase this rotator assembly. Also available for purchase is the Replacement Wind Cups and the Replacement Wind Vane Assembly.
For more information on how to replace parts on your wind meter please refer to our video tutorial.
These are the replacement wind cups and metal clips for the RaceAir Cloud weather stations that have the wind meter. Also available for purchase is the Replacement Wind Rotor Assembly and the Replacement Wind Vane Assembly.
For more information on how to replace parts on your wind meter please refer to our video tutorial.
This is the upper wind vane assembly for the RaceAir Cloud weather stations that have the wind meter. This piece comes with the upper rotating section with the direction fin as well as the bearing and tube that is located inside of the wind meter. If your bearing or tube breaks, this is the only replacement part available. Also available for purchase is the Replacement Wind Cups and the Replacement Rotor Assembly.
For more information on how to replace parts on your wind meter please refer to our video tutorial.
The replacement extension cable is meant specifically for the RaceAir Cloud weather station. This 40′ cable has a 4c Male Deutsch connector on either end and utilizes a high quality shielded cable. The RaceAir Cloud comes with a 40′ extension cable and this only needs to be purchased as a replacement or if a longer length is desired.
The RaceAir Cloud comes with a standard 40′ Extension Cable to connect your computer to the Cloud itself. Many users prefer to opt for the Trailer Install Kit that allows them to cleanly run a cable through their trailer. The kit comes with either a 30′ or 40′ cable that will run through your trailer and has a nice weather proof connector that will be mounted on the outside of your trailer. Then we supply you with either a 8′ or 12′ cable that will go from the outdoor connector to the RaceAir Cloud that is flying on the Cloud Pole. The other side of the cable that runs into the wall will terminate with a nice panel mount 4c Deustch connector that makes your countertop look nice and clean. Finally there is a short 2′ cable that will connect your Interface Box to the panel mount on your countertop.
Please choose between the two different connector options, Deutsch or Outdoor Weather Proof Connector. The Deutsch style is meant to be mounted on the top corner of the flashing of your trailer. Then simply run the pole cable outside the trailer and you can close the trailer door with the cable there. The Outdoor Weather Proof Connector option requires that you drill a hole in the outside of the trailer and the pole cable will plug in there.