The RaceAir Cloud comes with a standard 40′ Extension Cable to connect your computer to the Cloud itself. Many users prefer to opt for the Trailer Install Kit that allows them to cleanly run a cable through their trailer. The kit comes with either a 30′ or 40′ cable that will run through your trailer and has a nice weather proof connector that will be mounted on the outside of your trailer. Then we supply you with either a 8′ or 12′ cable that will go from the outdoor connector to the RaceAir Cloud that is flying on the Cloud Pole. The other side of the cable that runs into the wall will terminate with a nice panel mount 4c Deustch connector that makes your countertop look nice and clean. Finally there is a short 2′ cable that will connect your Interface Box to the panel mount on your countertop.
The RaceAir Cloud weather station utilizes an interface box to connect the Cloud to your computer. This box has a easy to push power button, an LED light to verify it’s on, a 12v DC power jack, a 4c Deutsch connector jack to connect the cloud and a 5′ USB cable to connect to your computer. This interface box comes with your Cloud so you will only need to purchase as a replacement.
This is a Replacement Trailer Mount Lower Bracket for the RaceAir Cloud weather station. This stainless steel bracket comes with the Cloud however if an additional one is needed, it can be purchased here. This lower bracket allows you to secure the RaceAir Cloud Extension Pole after it is first slid through the Trailer Mount Upper Bracket. Comes complete with the stainless thumb screw and the holes are positioned to ideally work with existing screws on your trailer.
This is a Replacement Trailer Mount Upper Bracket for the RaceAir Cloud weather station. This bracket comes with the Cloud however if an additional one is needed, it can be purchased here. This upper bracket allows you to slide the RaceAir Cloud Extension Pole through and into the Trailer Mount Lower Bracket. Comes complete with the rubber grommet and the holes are positioned to ideally work with existing screws on your trailer.
The RaceAir Cloud utilizes a Wooster Sherlock Extension Pole that has a very nice cam lock, allowing the Cloud to be attached quickly and securely. The standard length is 4-8 feet however 6-12 feet is also available for taller trailers. This pole is included in every RaceAir Cloud purchase so one is only needed as a replacement.
This Cloud Storage Mount has been designed to provide you with a secure and stable way to transport your RaceAir Cloud from track to track. This can be mounted on the inside of your trailer wall and should be positioned in a way that allows it to be out of the way yet still accessible. Please make sure that it is not mounted too high as you will have to lift the Cloud up slightly to get it off of the cam lock. This Cloud Storage Mount does come with your RaceAir Cloud so this will only need to be purchased if you need a replacement or a second storage mount.
We recognize that having a place to store your RaceAir Cloud when you are done racing for they day is just as important as setting it up. For that reason we have included 2 pole storage clips with every RaceAir Cloud purchase. However, if you need a replacement or an additional set you can purchase them here. Comes with 2 pole clips per purchase.
This is a power supply specifically designed to be used with the RaceAir Pro. This RaceAir Power Supply AC adapter is needed to utilize the Weather Pro software and comes with the PC Download Kit.
The Digital Delay Elite RPM Switch can handle up to four adjustable digital shift points (no chips to change or buy).
The RPM can be adjusted in 100 RPM increments and is retained in memory even when power is removed.
A selectable Shift Mode feature allows the shift output to be set for Normally Closed or Normally Open. The 40 Amp capacity shift output can handle most shifters without the need for an additional relay or wiring.
Also a handy shift test feature allows the testing of the wiring, shift solenoid, and shift cable without the motor running.
The Little Wizard is the smallest Delay Box made by Digital Delay, but don’t let the small size fool you. The Little Wizard Delay Box has many of the same features of much larger delay boxes.
The Little Wizard delay box utilizes a 2-line display of all four delay settings at one time. This allows Your Dial, Their Dial, Delay 1, and Delay 2 times to be reviewed without having to switch between screens.
This is a Replacement RaceAir Remote Outdoor Weather Station Head Unit only and will not work by itself. It needs either a Pager Interface box or a Computer Interface Box to work correctly.
This RaceAir Remote Filter will ensure that debris including dust and other particles cannot get into your RaceAir unit. When it comes to atmospheric sensors, protecting them from getting a layer or coating of dust can significantly extended the life of your weather station. Regular replacement of your RaceAir Remote filter will ensure your RaceAir Remote or RaceAir Remote Pager System works for years to come.
The DataMaxx Bracket Racing Data Logger Kit is designed to give you all of the essential information that every racer should know while staying under a grand! You’re not going to pay for anything you’re not going to use with this kit as it comes with Engine, Driveshaft, Battery, Oil, Water and a single EGT. You can easily add the DataMaxx LCD Dash to your kit or add it down the road. Also check out the Sportsman Kit for dual oxygen sensors and the Professional Kit for 8 EGT probes.
The DataMaxx Bracket Data Logger Kit is designed to be the most complete yet affordable racing data logger on the market. This kit allows you to have all of the essential sensors (Engine, Driveshaft, Battery, Oil, Water, EGT) with our incredible LCD Dash and the system is completely expandable by adding our Expansion Module. Also check out the Sportsman Kit for dual oxygen sensors and the Professional Kit for 8 EGT probes.
