The Vacuum Pressure Monitor Kit allows you to measure pressures from -14.7 to +30 inches of mercury. With calibration values available for inches of mercury (inHg) or pounds per square inch (psi) this vacuum pressure sensor works great for low range pressures that have a tendency to go into a vacuum state such as boost pressure.
Kit includes a stainless steel pressure transducer and 15′ extension cable. Compatible with most gases and fluids, including gasoline, methanol, oil, etc.
The 15 psi Pressure Monitor Kit is an extremely accurate low range pressure sensor, perfect for monitoring carbureted fuel pressure and boost psi.
Pressure sensor will monitor from 0 to 15 psi. Kit includes a stainless steel pressure transducer and 15′ extension cable. Compatible with most gases and fluids, including gasoline, methanol, oil, etc.
Pressure sensor will monitor from 0 to 100 psi. Kit includes a stainless steel pressure transducer and 15′ extension cable. Compatible with most gases and fluids, including gasoline, methanol, oil, etc.
This economy oil pressure sensor has a slightly slower sample rate than the other pressure sensors but works just fine for monitoring oil pressure. Sensor range is from 0 to 100 psi and does not come with any extension cable. Using a simple 18 gauge wire works just fine.
The 500 psi Pressure Monitor Kit is a great wide range pressure sensor that is still extremely accurate in low and high pressure environments. The 500 psi Pressure Monitor Kit is typically used for oil pressure, injected fuel psi, and transmission pressure. Pressure sensor will monitor from 0 to 500 psi. 500 psi Pressure Monitor Kit includes a stainless steel pressure transducer and 15′ extension cable. The 500 psi Pressure Monitor Kit is compatible with most gases and fluids, including gasoline, methanol, oil, etc.
Our 1500 psi Pressure Monitor Kit is great for monitoring nitrous bottle pressure as well as brake pressure. This is the highest range pressure sensor that we offer.
Pressure sensor will monitor from 0 to 1500 psi. Kit includes a stainless steel pressure transducer and 15′ extension cable. Compatible with most gases and fluids, including gasoline, methanol, oil, etc.
The Exhaust Temperature Kit is one of the most economical ways of maintaining a consistent tune up week in and week out. The leaner your engine is, the hotter the temperature. The richer the engine is, the cooler the temperature is. Where EGT sensors really excel is maintaining a specific tune up. Once you find a setup where your engine is running safely and consistently, you can note what the temperature and then strive for that temperature every race, ensuring your engine is tuned consistently.
Kit includes 3/16″ stainless steel exposed junction thermocouple, compression fitting, 10′ braided stainless extension wire and connector.
The Liquid Temperature Kit is our most accurate and reliable liquid temp sensor that we offer. Utilizing the proven technology of K-Type thermocouples, this sensor will give you reliably accurate water temp, oil temp and transmission temperatures.
Use this to monitor any liquid temperatures, such as water or oil. Comes with a 10′ stainless extension.
The Economy Temperature Sensor is the cheapest sensor we offer and for liquid temperatures, works just fine. At $30 you can easily add a water, oil or trans temp sensor to your DataMaxx system without breaking the bank.
This economy temperature sensor has a slightly slower sample rate but works just fine for liquid temperatures. Must be used in conjunction with an analog channel and cannot be plugged into an EGT Module.
Our Single Wide Band O2 Sensor Kit is designed to work with our DataMaxx Data Logger system and does not have it’s own display. The O2 kit comes with a single wide band oxygen sensor and a O2 controller box that has the capacity to run two O2 sensors, allowing you to upgrade in the future. Complete air/fuel ratio monitoring system connects directly to the DataMaxx data logger. This versatile tuning aid is designed to work with carbureted or fuel injected engines and the sensor is compatible with gasoline or methanol.
The Dual Wide Band O2 Sensor Kit gives you the ability to monitor the air/fuel ratio of either side of the engine. Oxygen sensors are quickly becoming the gold standard for tuning your engine as it is the most reliable measure of a cars tune up available today. Complete air/fuel ratio monitoring system connects directly to the DataMaxx data logger. This versatile tuning aid is designed to work with carbureted or fuel injected engines and the sensor is compatible with gasoline or methanol.
Our Single Axis Accelerometer allows you to determine just how many G forces you are pulling off of the starting line. For those racers that are pushing their performance to the peak, being able to track whether a setup change actually caused the car to launch harder is critical. With this G meter, you can easily see your g forces represented in a graph.
Robust shock travel sensor for monitoring suspension.This Shock Travel Sensor is available in a 4″ and 8″ lengths and is one of the strongest shock travel sensors we have found on the market. Mounting is a breeze and the information gathered through shock travel can go a long way to perfecting your setup.
This box gives you a live remote mount display of your ignition timing as well as output wires to hook into your DataMaxx Data Logger. Easy to install and comes with your choice of straight, 45 degree and 90 degree TDC pickup sensors.
Being able to monitor what happens to the car down the track is extremely important, but so is being able to monitor what the driver did. Did you let off the throttle before or after the finish line? How much did you let off? How much mph did that kill? With the Throttle Position Kit you can finally monitor exactly what the driver did at the top end and increase your chances of reproducing successful results.
