$1,349.95Original price was: $1,349.95.$1,249.95Current price is: $1,249.95.
The DataMaxx Bracket Racing Data Logger Kit is designed to give you all of the essential information that every racer should know while staying under a grand! You’re not going to pay for anything you’re not going to use with this kit as it comes with Engine, Driveshaft, Battery, Oil, Water and a single EGT. You can easily add the DataMaxx LCD Dash to your kit or add it down the road. Also check out the Sportsman Kit for dual oxygen sensors and the Professional Kit for 8 EGT probes.
$2,099.95Original price was: $2,099.95.$1,999.95Current price is: $1,999.95.
The DataMaxx Sportsman Data Logger Kit is designed to maintain a consistent tune up and maximize your consistency. A must have for any multi-day racers or racer that is ready to take their bracket racing to the next level. This kit comes with dual oxygen sensor to ensure your tune-up is consistent each round and each race allowing you to be more consistent than ever. Comes with Engine RPM, Driveshaft RPM, Fuel psi, Oil psi, Dual Oxygen Sensors, Battery Voltage and 2 Switch Monitors. You can easily add the DataMaxx LCD Dash to your kit or add it down the road. Also check out the Bracket Kit for an under a thousand dollars and the Professional Kit for 8 EGT probes.
$2,249.95Original price was: $2,249.95.$2,149.95Current price is: $2,149.95.
The DataMaxx Tuners Kit is a result of years of experience fine tuning not only our own race cars but plenty of our customers as well. This kit gives you what we feel is the most important aspects to turn your race car from a good one to a phenomenal one. Monitoring Engine, Driveshaft, Transbrake, Oil Pressure, Water Temp, Trans Temp, Shock Travel and then either Dual EGT probes or Dual Oxygen sensors. And with two additional channels left over, you can expand your system easily.
$2,495.95Original price was: $2,495.95.$2,395.95Current price is: $2,395.95.
With the DataMaxx Engine Saver Kit you get everything you need to help tune and protect your engine. You can monitor Engine RPM, Driveshaft RPM, Transbrake, Oil psi, Water temp and 8 Exhaust Gas Temperatures. This allows you to know exactly what is happening inside that engine and if you are pushing it too hard. When we are looking at our data after our pass, the majority of it is spent looking at the Engine & Driveshaft lines and then the 8 EGT’s, so with the Engine Saver Kit, you get everything you need to take your tuning to the next level with room to expand. To add the Pro Dash, see the Engine Saver Kit w/ Pro Dash
$3,499.95Original price was: $3,499.95.$3,399.95Current price is: $3,399.95.
The DataMaxx Professional Racing Data logger Kit is a must have for any heads up racer. Protect your expensive investment by using a data logger that monitors every cylinder and pressure necessary to increase horsepower without damaging your engine. Comes with Engine RPM, Driveshaft RPM, Fuel psi, Oil psi, Boost or Nitrous, Accelerometer, 8 EGT’s, Battery Voltage and 2 Switch Monitors. You can easily add the DataMaxx LCD Dash to your kit or add it down the road. Also check out the Bracket Kit for a kit under a thousand dollars and the Sportsman Kit for dual oxygen sensors.
$3,499.95Original price was: $3,499.95.$3,399.95Current price is: $3,399.95.
Our Tractor Pulling Data Logger kit give you everything you need to get those extra inches out of your pull.
Designed specifically for our Tractor Pullers in mind, our DataMaxx Tractor Pulling data logger kit with LCD comes with everything you need to dial in your pulls. The kit comes with our Main Module, Engine RPM, 8 Cylinder EGT kit, 3 pressure sensors and 2 switch monitors. This tractor pulling data logger will allow you to see exactly what is happening during your pull, how long it took before your tires broke free and how the engine reacts at the end of the pull. Seeing this data will allow you to understand what is happening during your run and allow you to make changes and see how those changes affect performance in a measurable way.
$999.95Original price was: $999.95.$899.95Current price is: $899.95.
The DataMaxx Pro Dash is the latest display in Computech’s data logger line that will take your racing program into the future and beyond by allowing a level of customization never had in the racing industry. The touch screen allows you to easily customize the multiple gauge pages to your specific needs and preferences. Our customizable target and range setting allows you to know your sensors are in range with the glance of the screen and without having to think or do any math. For footbrake you can easily maintain the perfect launch RPM without ever taking your eyes off of the tree by utilizing our custom warning lights. Combine that with our best in industry technical support and you have a display that will be an integral part of your racing operation.
The DataMaxx Main Module is the heart and brain of our entire data acquisition system. You cannot use any of our data logger components including the LCD unless you have this Main Module. The Main Module itself has room for 4 RPM sensors, 4 Analog sensors (temp, pressure, etc.), 2 switch event monitors, 2 light outputs and battery voltage. Keep in mind that the main module is simply the base of the system and is completely expandable by purchasing an Expansion Analog Module or EGT Module.
If you are interested in one of our pre-fabricated kits you can check out the Bracket Kit, Sportsman Kit and Professional Kit. These are designed to make the process of getting a data logger easier and gives you a discount as well. If you would prefer to put together your own custom kit please check out the DataMaxx Buyers Guide.
With the DataMaxx Expandable Racing Data Logger – Expansion Analog Module you can expand as much or as little as you like, and without ever paying for or sending back your data logger. The analog module has the capacity to monitor four more analog channels (pressures & temps) by simply connecting one wire to your DataMaxx Main Module
Each DataMaxx EGT Module allows you to add up to four additional temperature sensors for exhaust gas temperature, cylinder head temperature, oil temperature, water temperature, etc. to your DataMaxx Main Module. CAN Bus wiring only requires a single four conductor cable to connect the EGT Module to the Main Module, simplyfing installation.
The DataMaxx Remote SD Module is designed specifically for vehicles that are using magneto’s. Magneto’s disperse a wide range of electromagnetic noise and it is necessary to get the SD circuit physically far away from that radius of noise corruption. The remote SD comes with a 15 foot cable and can also be used as a convenient way to mount the SD card in an easy to reach location.
This Pro Dash 16v Adapter allows you to run your new Computech Pro Dash with a 16v battery. This 16v knockdown will make hooking up your Pro Dash a breeze and is required if using a 16v battery. Please know that the screen can function at 16-17v but will cut off beyond 17v which an alternator or battery can cause.
The Computech DataMaxx Data Logger samples at an extremelty fast rate, specifically 100 times per channel. That means for a typical Bracket kit we are sampling 650 times every second and for a professional kit it’s 1500 samples ever second.
Because of this we need an SD card that can sample at an extrodinary rate, specifically 150 times faster than the typical SD card.
We recommend purchasing your additional SD cards from Computech as we test each and every SD card to ensure proper speed before shipping them to you.
$219.95Original price was: $219.95.$208.95Current price is: $208.95.
The Driveshaft Kit allows you to get an accurate reading of your driveshaft RPM. Available in small pinion (1.878″) and large pinion (2.190″). Includes drive shaft pick-up sensor, 15′ extension cable, trigger collar, and mounting bracket.
